Panasonic ZEQUO 6400 Operating Instructions Manual page 873

74. Spanning Tree Protocol (STP) commands
restricted_tcn
Decide if this port is to propagate a topology change or not. The default value is false.
true Specify not to propagate a topology change.
false Specify to propagate a topology change.
fbpdu Decide if this port will flood STP BPDU when STP functionality is disabled.
enable
Enable port to flood STP BPDU when STP functionality is disabled.
disable
Disable port from flooding STP BPDU when STP functionality is disabled.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure STP ports:
Zxxx0:admin# config stp ports 1 externalCost auto
Command: config stp ports 1 externalCost auto
Success.
Zxxx0:admin#
74.15. config stp mst_ports
 Description
Internal Path Cost and Port Priority of a Port in MSTI can be separately configured to
different values from the configuration of CIST (instance ID = 0).
 Format
config stp mst_ports <portlist> instance_id <value 0-64> {internalCost [auto | <value 1-
200000000>] | priority <value 0-240>}(1)
 Parameters
<portlist>Specify a range of ports.
instance_id
Specify an instance ID.
<value 0-64>
Instance = 0 represents CIST, Instance from 1 to 64 represents MSTI 1 to MSTI 64.
internalCost
The Port Path Cost used in MSTP.
auto Specify to automatically determine the internal cost.
<value 1-200000000>
Specify a value between 1 and 200000000.
874