5.24. config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default Specify the default terminal width value.
<value 80-200>
Specify a terminal width value between 80 and 200 characters. The default value is 80.
Restrictions
None.
Example
To configure the terminal width:
Zxxx0:admin#config terminal width 90
Command: config terminal width 90
Success.
Zxxx0:admin#
5.25. show terminal width
Description
This command is used to display the configuration of the current terminal width.
Format
show terminal width
Parameters
None.
Restrictions
None.
5. Basic Management Commands
51