Md5 Commands - Panasonic ZEQUO 6400 Operating Instructions Manual

50. MD5 Commands

50.MD5 Commands
create md5 key <key_id 1-255> <password 16>
config md5 key <key_id 1-255> <password 16>
delete md5 key <key_id 1-255>
show md5 {key <key_id 1-255>}
50.1. create md5
 Description
This command is used to create an MD5 key table.
 Format
create md5 key <key_id 1-255> <password 16>
 Parameters
<key_id 1-255>
Enter the MD5 key to be added. This key must be between 1 and 255.
<password 16>
Enter an panasonicnumeric string of between 1 and 16, case-sensitive characters, used to
generate the Message Digest which is in turn used to authenticate OSPF packets within
the OSPF routing domain.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To create an MD5 key table:
Zxxx0:admin#create md5 key 1 zequo
Command: create md5 key 1 zequo
Success.
Zxxx0:admin#
556