59. Open Shortest Path First (OSPF) Command List
59.22. show ospf lsdb
Description
This command is used to display the OSPF Link State Database (LSDB).
Format
show ospf lsdb {area <area_id> | advertise_router <ipaddr> | type [rtrlink | netlink |
summary | assummary | asextlink | nssa_ext | stub]}
Parameters
area
(Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
<area_id>
Enter the area ID used here.
advertise_router
(Optional) Specifies the IP address of the advertising router.
<ipaddr>
Enter the advertising router's IP address here.
type
(Optional) Specifies the type of link displayed.
rtrlinkSpecifies the type to be displayed as router link.
netlink
Specifies the type to be displayed as network link.
summary
Specifies the type to be displayed as summary.
assummary
Specifies the type to be displayed as AS summary.
asextlink
Specifies the type to be displayed as AS external link.
nssa_ext
Specifies the type to be displayed as NSSA external information.
stub Specifies the type to be displayed as STUB link.
Restrictions
None.
668