Panasonic ZEQUO 6400 Operating Instructions Manual page 633

58. Network Monitoring Commands
 Example
To display the the protocols or applications that support the enhanced log:
Zxxx0:admin#show log_software_module
Command: show log_software_module
ERROR_LOG
Zxxx0:admin#
58.11. config log_save_timing
 Description
This command is used to set the method to save log.
 Format
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
 Parameters
time_interval
Specify to save log to Flash every xxx minutes. If no log occurs in this period, nothing will
be saved.
<min 1-65535>
Specify the time between 1 and 65535 minutes.
on_demand
Specify to save log to Flash whenever the user types "save log" or "save all". This is the
default.
log_trigger
Specify to save log to Flash whenever log arrives.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To configure method to save log as on demand:
Zxxx0:admin# config log_save_timing on_demand
Command: config log_save_timing on_demand
Success.
Zxxx0:admin#
DHCPv6_CLIENT
MSTP
634
DHCPv6_RELAY
OSPFV2
DHCPv6_SERVER
VRRP