Panasonic ZEQUO 6400 Operating Instructions Manual page 284

22.19. show dhcp_relay option_60
 Description
This command is used to display the DHCP relay option 60 entries.
 Format
show dhcp_relay option_60 {[string <multiword 255> | ipaddress <ipaddr> | default]}
 Parameters
string (Optional) Display the entry whose string equals the string specified.
<multiword 255>The string can be up to 255 characters long.
ipaddress
(Optional) Display the entry whose IP ipaddress equals the specified IP address.
<ipaddr>
Enter the IP address here.
default (Optional) Display the default behaviour of DHCP relay option 60.
If no parameter is specified, all DHCP option 60 entries will be displayed.
 Restrictions
None.
 Example
To display the DHCP option 60 entries:
Zxxx0:admin#show dhcp_relay option_60
Command: show dhcp_relay option_60
Default Processing Mode: Drop
Default Servers:
10.90.90.100
10.90.90.101
10.90.90.102
Matching Rules:
String
-------
abc
abcde
abcdefg
Total Entries: 3
Zxxx0:admin#
Match Type
---------
Exact Match
Partial Match
Exact Match
285
22. DHCP Relay Commands
IP Address
---------
10.90.90.1
10.90.90.2
10.90.90.3