Panasonic ZEQUO 6400 Operating Instructions Manual page 653

59. Open Shortest Path First (OSPF) Command List
 Example
To create an OSPF area:
Zxxx0:admin# create ospf area 10.48.74.122 type stub stub_summary enabled metric 1
Command: create ospf area 10.48.74.122 type stub stub_summary enabled metric 1
Success.
Zxxx0:admin#
59.7. config ospf area
 Description
This command is used to configure an OSPF area's settings.
 Format
config ospf area <area_id> type [normal | [stub | nssa {translate [enable | disable]}]
{stub_summary [enable | disable] | metric <value 0-65535>}]
 Parameters
<area_id>Enter the OSPF area ID used here.
type Specifies the OSPF area operation type. In some Autonomous Systems, the majority of
the topological database may consist of AS external advertisements. An OSPF AS external
advertisement is usually flooded throughout the entire AS. However, OSPF allows certain
areas to be configured as "stub areas". AS external advertisements are not flooded into/
throughout stub areas; routing to AS external destinations in these areas is based on a
(per-area) default only. This reduces the topological database size, and therefore the
memory requirements, for a stub area's internal routers.
normal
Specifies that the OSPF area type will be set to normal.
stub Specifies that the OSPF area type will be set to STUB.
nssa Specifies that the OSPF area type will be set to NSSA.
translate
(Optional) Specifies if translation will be enabled or disabled.
enable
Specifies that the translate option will be enabled.
disable
Specifies that the translate option will be disabled.
stub_summary
(Optional) Specifies whether the summary LSA is effective for this area.
enable
Specifies that the STUB summary option will be enabled.
disable
Specifies that the STUB summary option will be disabled.
654