Panasonic ZEQUO 6400 Operating Instructions Manual page 392

33.5. config gratuitous_arp send
ipif_status_up
 Description
This command is used to enable or disable the sending of gratuitous ARP requests
when the IP interface status becomes up. This is used to automatically announce the
interface's IP address to other nodes. By default, the state is disabled. When the state
is enabled and IP interface is linked up, one gratuitous ARP packet will be broadcast.
 Format
config gratuitous_arp send ipif_status_up [enable | disable]
 Parameters
enable Enable the sending of gratuitous ARP requests when the IPIF status becomes up.
disable Disable the sending of gratuitous ARP requests when the IPIF status becomes up.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable the sending of gratuitous ARP requests when the IP interface status
becomes up:
Zxxx0:admin#config gratuitous_arp send ipif_status_up enable
Command: config gratuitous_arp send ipif_status_up enable
Success.
Zxxx0:admin#
33. Gratuitous ARP Commands
393