Panasonic ZEQUO 6400 Operating Instructions Manual page 615

57. Network Management Commands
 Example
To enable SNMP linkchange trap support:
Zxxx0:admin#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
Zxxx0:admin#
57.15. disable snmp linkchange_traps
 Description
This command is used to disable SNMP linkchange trap support.
 Format
disable snmp linkchange_traps
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To disable SNMP linkchange trap support:
Zxxx0:admin#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
Zxxx0:admin#
616