20.44. no debug pim ssm
Description
This command is used to disable the PIM-SSM debug function.
Format
no debug pim ssm
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the PIM-SSM debug function:
Zxxx0:admin# no debug pim ssm
Command: no debug pim ssm
Success.
Zxxx0:admin#
20.45. debug show status
Description
Show the debug handler state and the specified module's debug status.
If the input module list is empty, the states of all registered modules which support debug
module will be shown.
Format
debug show status {module <module_list>}
Parameters
module (Optional) Specifies the module list.
<module_list>
Enter the module list here.
20. Debug Software Command List
261