Panasonic ZEQUO 6400 Operating Instructions Manual page 277

22. DHCP Relay Commands
 Parameters
mac_address
The entry with the specified MAC address will be deleted
<macaddr>
Enter the MAC address here.
string The entry with the specified string will be deleted.
<desc_long 255>
The string value can be up to 255 characters long.
all All rules excluding the default rule will be deleted.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To delete a DHCP Option 61 entry:
Zxxx0:admin#config dhcp_relay option_61 delete mac_address 00-11-22-33-44-55
Command: config dhcp_relay option_61 delete mac_address 00-11-22-33-44-55
Success.
Zxxx0:admin#
22.11. config dhcp_relay option_61 state
 Description
This command is used to decide whether DHCP relay will process the DHCP Option 61 or
not. When Option 61 is enabled, if the packet does not have Option 61, then the relay
servers cannot be determined based on Option 61. If the relay servers are determined
based on Option 60 or Option 61, then per IPIF configured servers will be ignored. If the
relay servers are not determined either by Option 60 or Option 61, then per IPIF configured
servers will be used to determine the relay servers.
 Format
config dhcp_relay option_61 state [enable | disable]
 Parameters
enable Specify to enable the DHCP relay function to use option 61 rules to relay DHCP packets.
disable Specify to disable the DHCP relay function to use option 61 rules to relay DHCP packets.
278