49.4. config mac_based_access_control
method
Description
This command is used to authenticate via a local database or a RADIUS server.
Format
config mac_based_access_control method [local | radius]
Parameters
local
Specify to authenticate via local database.
radius
Specify to authenticate via RADIUS server.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the MAC-based access control method as local:
Zxxx0:admin#config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
Zxxx0:admin#
49.5. config mac_based_access_control
guest_vlan ports
Description
This command is used to put the specified port in guest VLAN mode. For those ports
not contained in the port list, they are in non-guest VLAN mode.For detailed
information about the operation of guest VLAN mode, please see the description for
configuring the MAC-based access control port command.
Format
config mac_based_access_control guest_vlan ports <portlist>
49. MAC-based Access Control Commands
537