Panasonic ZEQUO 6400 Operating Instructions Manual page 140

8.10. delete port_group
 Description
This command is used to delete port group.
 Format
delete port_group [id <value 1-64> | name <name 16>]
 Parameters
id Specifies the port group ID.
<value 1-64>
Enter the port group ID used here. This value must be between 1 and 64.
name Specifies the port group name.
<name 16>
Enter the port group name here. This name can be up to 16 characters long.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To delete the port group which ID is "2":
Zxxx0:admin# delete port_group id 2
Command: delete port_group id 2
Success.
Zxxx0:admin#
8. Access Control List (ACL) Egress Command List
141