19. Didital Diagnostic Monitoring (DDM) Commands
19.6. config ddm ports reload threshold
Description
This command is used to reload the DDM threshold configuration. The command reloads
default threshold configuration of special ports. If the ports are link up with optic modules,
all thresholds of those ports will be set to hardware default. If the ports are not optic ports,
or the ports are link down, all thresholds configuration will be clear.
Format
config ddm ports [<portlist> | all] reload_threshold
Parameters
ports
<portlist>
Specifies a range of ports to be configured. (The portlist format: UnitID: port
number).
all
If 'all' parameter is chosen, all optic ports' operating parameters will be configured.
Restrictions
Administrators and operators.
Example
To reload port 21's threshold configuration:
Zxxx0:admin#
config ddm ports 21 reload_threshold
Command: config ddm ports 21 reload_threshold
Success.
Zxxx0:admin#
210