Show Time_Range - Panasonic ZEQUO 6400 Operating Instructions Manual

 Example
To configure the range of time to activate a function on the Switching Hub:
Zxxx0:admin#config time_range testdaily hours start_time 12:0:0 end_time 13:0:0
weekdays mon,fri
Command: config time_range testdaily hours start_time 12:0:0 end_time 13:0:0
weekdays mon,fri
Success.
Zxxx0:admin#
7.6.

show time_range

 Description
This command is used to display current time range settings.
 Format
show time_range
 Parameters
None.
 Restrictions
None.
 Example
To display current time range setting:
Zxxx0:admin#show time_range
Command: show time_range
Time Range Information
-------------------------
Range Name : testdaily
Weekdays : Mon,Fri
Start Time : 12:00:00
End Time : 13:00:00
Total Entries :1
Zxxx0:admin#
7. Access Control List (ACL) Commands
109