Panasonic ZEQUO 6400 Operating Instructions Manual page 491

45. Link Aggregation Commands
 Parameters
<value 1-48>
Specify the group ID. The group number identifies each of the groups. The Switching
Hub allows up to 48 link aggregation groups to be configured.
type (Optional) Specify the group type belongs to static or LACP. If type is not specified, the
default is the static type.
lacp Specify the group type as LACP.
static Specify the group type as static.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To create a link aggregation group:
Zxxx0:admin#create link_aggregation group_id 1 type lacp
Command: create link_aggregation group_id 1 type lacp
Success
Zxxx0:admin#
45.2. delete link_aggregation group_id
 Description
This command is used to delete a previously configured link aggregation group.
 Format
delete link_aggregation group_id <value 1-48>
 Parameters
<value 1-48>
Specify the group ID. The group number identifies each of the groups. The Switching Hub
allows up to 48 link aggregation groups to be configured.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
492