28. Domain Name System (DNS) Relay Commands
To enable cache lookup for DNS relay:
Zxxx0:admin#enable dnsr cache
Command: enable dnsr cache
Success.
Zxxx0:admin#
To enable static table lookup for DNS relay:
Zxxx0:admin#enable dnsr static
Command: enable dnsr static
Success.
Zxxx0:admin#
28.3. disable dnsr
Description
This command is used to disable DNS relay on the Switching Hub.
Format
disable dnsr {[cache | static]}
Parameters
cache
(Optional) Specify to disable the cache lookup for the DNS relay on the Switching Hub.
static
(Optional) Specify to disable the static table lookup for the DNS relay on the Switching
Hub.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the status of DNS relay:
Zxxx0:admin#disable dnsr
Command: disable dnsr
Success.
Zxxx0:admin#
348