Panasonic ZEQUO 6400 Operating Instructions Manual page 450

39.6. show ip_source_binding
 Description
This command is used to show the binding entries.
 Format
show ip_source_binding [all | ipaddress <ipaddr> mac_address <macaddr>]
 Parameters
ipaddr Specify the learned IP address of the entry in the database.
macaddr Specify the MAC address of the entry or the blocked MAC address.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To show the binding entries:
The ACL status will display regardless of whether the hardware ACL is active or not.
Zxxx0:admin# show ip_source_binding all
Command: show ip_source_binding all
M(Mode) - D:DHCP,S:Static
IP Address
--------------------------------------- ----------------- -- --
10.1.1.1
10.1.1.2
10.1.1.10
Total Entries : 3
Zxxx0:admin#
39. IP Source Address Verify Commands
ACL - A:Active I:Inactive
MAC Address
00-00-00-00-00-11 S
00-00-00-00-00-12 S
00-00-00-00-00-aa D
451
M ACL Port
-----
I 3
A 1
A 1