Panasonic ZEQUO 6400 Operating Instructions Manual page 945

84. Utility Commands
Zxxx0:admin#config rcp server username travel
Command: config rcp server username travel
Success.
Zxxx0:admin#
84.14. config rcp server clear
 Description
This command is used to clear Remote Copy Protocol (RCP) global server information.
 Format
config rcp server clear [ipaddr | username | both]
 Parameters
ipaddr Clear the IP address of the RCP server.
username
Clear the username of the RCP server.
both Clear both the IP address and the username of the RCP server.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To clear the current username of the RCP global server:
Zxxx0:admin#config rcp server clear username
Command: config rcp server clear username
Success.
Zxxx0:admin#
946