65. Port Security Commands
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable a port security trap:
Zxxx0:admin#enable port_security trap_log
Command: enable port_security trap_log
Success.
Zxxx0:admin#
65.9. disable port_security trap_log
Description
This command is used to disable a port security trap/log. If the port security trap is
disabled, no trap will be sent out for MAC violations, and no log will be recorded.
Format
disable port_security trap_log
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To prevent a port security trap from being sent from the Switching Hub:
Zxxx0:admin#disable port_security trap_log
Command: disable port_security trap_log
Success.
Zxxx0:admin#
760