Panasonic ZEQUO 6400 Operating Instructions Manual page 613

57. Network Management Commands
 Example
To prevent SNMP traps from being sent from the Switching Hub:
Zxxx0:admin#disable snmp traps
Command: disable snmp traps
Success.
Zxxx0:admin#
57.12. enable snmp authenticate_traps
 Description
This command is used to enable SNMP authentication failure trap support.
 Format
enable snmp authenticate_traps
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To enable SNMP authentication trap support:
Zxxx0:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
Zxxx0:admin#
614