Panasonic ZEQUO 6400 Operating Instructions Manual page 40

 Parameters
high Specify the high threshold value. The high threshold must bigger than the low threshold.
<temperature -500-500>
Specify the high threshold value. This value must be between -500 and 500.
low Specify the low threshold value.
<temperature -500-500>
Specify the low threshold value. This value must be between -500 and 500.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To configure a warming temperature threshold high of 80:
Zxxx0:admin#config temperature threshold high 80
Command: config temperature threshold high 80
Success.
Zxxx0:admin#
5.12. show serial_port
 Description
This command is used to display the current console port setting.
 Format
show serial_port
 Parameters
None.
 Restrictions
None.
5. Basic Management Commands
41