Panasonic ZEQUO 6400 Operating Instructions Manual page 900

 Example
To create a subnet VLAN entry:
Zxxx0:admin#create subnet_vlan network 172.168.1.1/24 vlan v2 priority 2
Command: create subnet_vlan network 172.168.1.1/24 vlan v2 priority 2
Success.
Zxxx0:admin#
To create an IPv6 subnet VLAN entry:
Zxxx0:admin# create subnet_vlan ipv6network fe80:250:baff::0/64 vlan v2 priority 2
Command: create subnet_vlan ipv6network fe80:250:baff::0/64 vlan v2 priority 2
Success.
Zxxx0:admin#
78.2. delete subnet_vlan
 Description
This command is used to delete a subnet VLAN from the Switching Hub. Users can
delete a subnet VLAN entry by IP subnet or VLAN, or delete all subnet VLAN entries.
 Format
delete subnet_vlan [network <network_address> | ipv6network <ipv6networkaddr> |
vlan <vlan_name 32> | vlanid <vidlist> | all]
 Parameters
network Specify an IPv4 network address.
<network_address>
Specify an IPv4 network address. The format is ipaddress/prefix length.
ipv6network
Specify an IPv6 network address.
<ipv6networkaddr>
Specify an IPv6 network address. The format is ipaddress/prefix length.
vlan Specify to delete all subnet VLAN entries associated with this VLAN.
<vlan_name 32>
Specify a VLAN name. The maximum length is 32 characters.
vlanid Specify a list of VLANs by VLAN ID.
<vidlist>
Specify the VLAN ID.
all Specify to delete all subnet VLAN entries.
78. Subnet VLAN Commands
901