Show Syslog Host - Panasonic ZEQUO 6400 Operating Instructions Manual

58.18. show syslog host

 Description
This command is used to display syslog host configurations.
 Format
show syslog host {<index 1-4>}
 Parameters
<index 1-4>
(Optional) Specify the host index.
If no parameter is specified, all hosts will be displayed.
 Restrictions
None.
 Example
To display syslog host configurations:
Zxxx0:admin#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host 1
IP Address : 10.1.1.2
Severity : Warning
Facility : Local10
UDP port : 514
Status : Disabled
Host 2
IP Address : 3000:501:100:ffff:101:202:303:1
Severity : Emergency
Facility : Local10
UDP port : 514
Status : Disabled
Total Entries : 2
Zxxx0:admin#
58. Network Monitoring Commands
641