Panasonic ZEQUO 6400 Operating Instructions Manual page 552

 Example
To enable the trap state for MAC-based Access Control:
Zxxx0:admin# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
Zxxx0:admin#
49.20. config mac_based_access_control
password_type
 Description
This command is used to configure the type of RADIUS authentication password for
MAC-based Access Control.
 Format
config mac_based_access_control password_type [manual_string |
client_mac_address]
 Parameters
manual_string
Specifies to use the same string as password for all clients do RADIUS authentication, the
string can be configured by using the command "config mac_based_access_control
password".
client_mac_address
Specifies to use the client's MAC address as the password for RADIUS authentication. The
MAC address format can be configured by using the command "config authentication
mac_format".
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the MAC-based Access Control using client's MAC address as
authentication password:
49. MAC-based Access Control Commands
553