73. SNMPv1/v2/v3 Commands
73.13. show snmp engineID
Description
This command is used to display the identification of the SNMP engine on the Switching
Hub.
Format
show snmp engineID
Parameters
None.
Restrictions
None.
Example
To display the identification of an SNMP engine:
Zxxx0:admin#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 1023457890
Zxxx0:admin#
73.14. create snmp group
Description
This command is used to create a new SNMP group.
Format
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]] {read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}(1)
Parameters
<groupname 32>
Specify the name of the group.
v1
Specify the least secure of the possible security models.
v2c
Specify the second least secure of the possible security models.
850