Panasonic ZEQUO 6400 Operating Instructions Manual page 529

48. MAC Notification Commands
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To enable the MAC notification function:
Zxxx0:admin#enable mac_notification
Command: enable mac_notification
Success.
Zxxx0:admin#
48.2. disable mac_notification
 Description
This command is used to disable the trap notification for new learned MAC addresses
on the Switch.
 Format
disable mac_notification
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To disable the MAC notification function:
Zxxx0:admin#disable mac_notification
Command: disable mac_notification
Success.
Zxxx0:admin#
530