Panasonic ZEQUO 6400 Operating Instructions Manual page 289

23. DHCP Server Commands
23.3. show dhcp excluded_address
 Description
This command is used to display the groups of IP addresses which are excluded from being
a legal assigned IP address.
 Format
show dhcp excluded_address
 Parameters
None.
 Restrictions
None.
 Example
To display the DHCP server excluded addresses:
Zxxx0:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index Begin Address
----- -------------
1 192.168.0.1
2 10.10.10.10
Total Entries : 2
Zxxx0:admin#
23.4. create dhcp pool
 Description
This command is used to create a DHCP pool by specifying a name. After creating a DHCP
pool, use other DHCP pool configuration commands to configure parameters for the pool.
 Format
create dhcp pool <pool_name 12>
End Address
--------------
192.168.0.100
10.10.10.11
290