Setting The Status Display - Panasonic AV-HS410N Operating Instructions Manual

1. Basic operations

1-14. Setting the status display

Displaying the audio status
When the menu display mode has been set to "1 line of menu
display and full-screen image display", the audio status of the
signals selected by the DISP bus is displayed on the WFM or
VECTOR screen.
When SDI input signals are selected:
T he status of the embedded audio is displayed.
When PGM, PVW, MV or AUX signals are selected:
W hen "ON" has been selected as the ancillary data setting,
the status of the embedded audio is displayed.
Audio channels
-STATUS-
<Format>
1080/23PsF
<GROUP>
Audio group
1,2,3,4
<RATE>
Audio rate
44.1KHz
<ACT>
1,2,3,4
5,6,7,8
System formats used by the unit
Display
1080/59i
720/59p
1080/24PsF
1080/23PsF
480/59i
1080/50i
720/50p
576/50i
72
System format
1080/59.94i
720/59.94p
1080/24PsF
1080/23.98PsF
480/59.94i
1080/50i
720/50p
576/50i