Setup  Pass: Password Feature; Table 4-10: Password Levels - Teledyne T200H User Manual

Teledyne API - Model T200H/T200M Operation Manual
4.9. SETUP  PASS: PASSWORD FEATURE
Password
Null (000)
101 Configuration/Maintenance Access to Primary Setup and Secondary SETUP Menus when
818 Configuration/Maintenance Access to Secondary SETUP Submenus VARS and DIAG whether
07270D DCN7141
The T200H/M provides password protection of the calibration and setup functions to
prevent unauthorized adjustments. When the passwords have been enabled in the PASS
menu item, the system will prompt the user for a password anytime a password-
protected function (e.g., SETUP) is selected. This allows normal operation of the
instrument, but requires the password (101) to access to the menus under SETUP. When
PASSWORD is disabled (SETUP>OFF), any operator can enter the Primary Setup
(SETUP) and Secondary Setup (SETUP>MORE) menus. Whether PASSWORD is
enabled or disabled, a password (default 818) is required to enter the VARS or DIAG
menus in the SETUP>MORE menu.
There are three levels of password protection, which correspond to operator,
maintenance, and configuration functions.
functions in the previous level.

Table 4-10: Password Levels

Level
Operation All functions of the MAIN menu: TEST, GEN, initiate SEQ , MSG, CLR
PASSWORD is enabled.
PASSWORD is enabled or disabled.
To enable or disable passwords, press the following menu button sequence:
Toggle this
button to
enable, disable
password
feature
Each level allows access to all of the
Menu Access Allowed
SAMPLE A1:NXCNC1=100PPM
< TST TST > CAL
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS
SETUP X.X PASSWORD ENABLE: OFF
OFF
SETUP X.X PASSWORD ENABLE: ON
ON
Operating Instructions
NOX=XXX.X
SETUP
CLK MORE EXIT
ENTR EXIT
ENTR EXIT
97