Table A-1: M100E Setup Variables, Revision B.3 - Teledyne 100E Instruction Manual

APPENDIX A-2: Setup Variables For Serial I/O,
Revision B.3
APPENDIX A-2: Setup Variables For Serial I/O, Revision B.3
Setup Variable
DAS_HOLD_OFF
TPC_ENABLE
RCELL_SET
1
IZS_SET
DYN_ZERO
DYN_SPAN
CONC_PRECISION
CLOCK_ADJ
LANGUAGE_SELECT
MAINT_TIMEOUT
CONV_TIME
230
Table A-1: M100E Setup Variables, Revision B.3
Numeric Default Value
Units
Minutes 15
— ON,
4
OFF
ºC 50
Warnings:
45 to 55
ºC 50
Warnings:
45 to 55
— OFF
— OFF
— 1
Sec./Day 0
— ENGL
Hours 2
— 33 MS
Model 100E Instruction Manual
Value Range Description
0.5 to 20 Duration of DAS hold off
period.
OFF, ON ON enables temperature
and pressure
compensation; OFF
disables it.
30 to 70 Sample chamber
temperature set point and
warning limits.
30 to 70 IZS temperature set point
and warning limits.
OFF, ON ON enables contact
closure dynamic zero; OFF
disables it.
OFF, ON ON enables contact
closure dynamic span;
OFF disables it.
AUTO, 0, 1, 2, Number of digits to
3, & 4 display to the right of the
decimal point for
concentrations on the
display. Enclose value in
double quotes (") when
setting from the RS to 232
interface.
-60 to 60 Time-of-day clock speed
adjustment.
ENGL, Selects the language to
use for the user interface.
SECD,
Enclose value in double
EXTN
quotes (") when setting
from the RS-232
interface.
0.1 to 100 Time until automatically
switching out of software-
controlled maintenance
mode.
33 MS, Conversion time for PMT
and UV detector channels.
66 MS,
Enclose value in double
133 MS,
quotes (") when setting
from the RS-232
266 MS,
interface.
533 MS,
1 SEC,
2 SEC
045150110 Rev B.3