Test Channel Output; Figure 5-35: Diag - Test Channel Output - Teledyne t100 Operation Manual

SETUP Menu
5.9.9.

TEST CHANNEL OUTPUT

124
When activated, output channel A3 can be used in the standard configuration to report
one of the test functions viewable from the SAMPLE mode display.
To activate the A3 channel and select a test function, access the Signal I/O from the
DIAG Menu, SETUP>MORE.DIAG (refer to Figure 5-16), then press:
Press PREV or NEXT
to move through the
list of available
parameters
(Table 6-9)
Figure 5-35:
Teledyne API - T100 UV Fluorescence SO
DIAG SIGNAL I / O
PREV NEXT
Continue to press NEXT until ...
DIAG TEST CHAN OUTPUT
PREV NEXT
DIAG TCHN TEST CHANNEL: NONE
NEXT
DIAG TCHN TEST CHANNEL: PMT READING
PREV NEXT
Press ENTR to
select the displayed
parameter and to
activate the test
channel.
DIAG – Test Channel Output
ENTR EXIT
ENTR EXIT
ENTR EXIT
ENTR EXIT
Press EXIT to
return to the
DIAG menu
06807F DCN7335
Analyzer
2