Registration Roller Replacement - Ricoh FT4430 Service Manual

16 April '88

5. Registration Roller Replacement

Remove the DF cover (4 screws,
1 .
2
Remove the indicator board [A]
3 .
Remove the harness clamp [B] as shown (1 screw).
4 . Disconnect the registration solenoid harness [C] and roller release
solenoid harness [D] (2
5 . Move the indicator board and the harness bracket [E] (1 screw) away
from the feed-in section.
Remove the springs of the friction roller release lever [F] and the registra-
6 .
tion clutch lever
Remove the solenoid assembly [H] (2 screws).
7
NOTE:
The release solenoid plunger is engaged with the release lever [1].
2
(2
red connectors).
[G].
7-32
collars).
screws).