Dial Intercom - NEC UNIVERGE SV7000 User Manual

Dial Intercom

To initiate
Lift handset or press the Speaker key.
Press DICM key.
Dial desired intercom station number. Receive ringback tone.
To answer
DICM LED flashes, indicating an incoming intercom call.
Press DICM.
Lift handset or press Speaker. LCD shows solid green.
If called station is engaged in a non-intercom call, the station may press
DICM after placing the original call on hold (with the Hold key).
To bridge into a dial intercom call
Note: Bridging is an optional feature.
Press the DICM key, lift handset or press Speaker.
A three-party conference is established.
Note: Dial intercom provides a Dial Intercom group where each member of the group may be called by a 1- or 2-digit
number without using their prime lines.
– 41 –
Called party
ICM
4:26 PM TUE 13 APR 2004
Calling party
ICM
4:26 PM TUE 13 APR 2004
Overriding party
OVERRIDE
4:26 PM TUE 13 APR 2004
CONF
4:26 PM TUE 13 APR 2004
2
2
3