Manual Intercom; Dial Intercom; Dial By Name Using System Speed Dialing - NEC DT310 User Manual

Manual Intercom

To initiate
Lift handset or press Speaker, press MICM,
ringback tone is heard.
ICM
4:26 PM TUE 12 FEB 2008
Each press of MICM key sends tone bursts.
To answer
MICM key flashes, indicating an incoming call. Ring
tone may also be heard.
ICM
4:26 PM TUE 12 FEB 2008
Press MICM.
Lift handset or press Speaker, LED lights solid
green.
If called station is engaged in a non-intercom call,
the station may press MICM after placing original
caller on hold (with Hold key).
Called party
2000
Calling party
2001

Dial Intercom

To initiate
Lift handset or press the Speaker key.
Press DICM key.
Dial desired intercom station number (0-9). Tone
burst is sent. (Press 1 to change to ring tone signal.
To answer
DICM LED flashes, indicating an incoming intercom
call. Tone burst or ring tone is heard.
Press DICM.
Lift handset or press Speaker. LCD shows solid
green.
Dial By Name Using System Speed
Dialing
To initiate
Press the SYS soft key.
Enter up to the first four characters of a name using
the keypad.
Press the UP or DOWN key to start the search.
The name and the number are shown on the LCD.
If more than one name matches the letters entered,
scroll through the matches with the UP or DOWN
soft key.
If no matches are found, the first System Speed
Dial buffer will be displayed.
Press the Speaker key, or select a Line/Trunk key
to dial the selected number
33