Figure 3-111 Dhcp Server Pool - Network Configuration - Edge-Core ES4625 Management Manual

3
Configuring the Switch
Configuring a Network Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for any
entry. Click the radio button for "Network." Enter the IP address and subnet mask for
the network pool. Configure the optional parameters such as gateway server and
DNS server. Then click Apply.

Figure 3-111 DHCP Server Pool - Network Configuration

CLI – This example configures a network address pool.
Console(config)#ip dhcp pool tps
Console(config-dhcp)#network 10.1.0.0 255.255.255.0
Console(config-dhcp)#default-router 10.1.0.253
Console(config-dhcp)#dns-server 10.2.3.4
Console(config-dhcp)#netbios-name-server 10.1.0.33
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#domain-name example.com
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#lease infinite
Console(config-dhcp)#
3-192
4-126
4-127
4-127
4-128
4-130
4-131
4-128
4-129
4-129
4-131