Table of Contents
Advertisement
Chapter 2 Convenient Features
6.3
Utilities Provided by EXPRESSBUILDER
The following utilities can be started when you select Invoke various utilities from Top menu (described in
Chapter 2 (6.2 Menu) - (2) Top Menu):
(1)
Save or restore RAID configuration data
Saves and restores the configuration data on the RAID Controller.
(2)
Run a file directly
Directly starts a external utility stored in removable media. Use this function only for utilities provided by
NEC.
6.4
Configure EXPRESSBUILDER Settings
EXPRESSBUILDER settings can be configured when you select Configure EXPRESSBUILDER settings from
Top Menu (described in Chapter 2 (6.2 Menu) - (2) Top Menu), as follows.
(1)
Load a driver into EXPRESSBUILDER
A driver stored in removable media can be loaded. Use this function only for drivers provided by NEC.
Note
The operation of external utilities provided by companies other than NEC is not
guaranteed.
Note
The operation of drivers that are provided by companies other than NEC is not
guaranteed.
Express5800/E120d-M Maintenance Guide
6. Details of EXPRESSBUILDER
97
Advertisement
Table of Contents
