[Cmea] Fault Information Store/Display Functions - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
EA
FUNCTION:
This command is used for fault maintenance of the PBX. The functions of this command are outlined
below:
• Storing fault information into the Fault Store Memory upon occurrence of a fault.
• Display of the stored fault information
• Control of the external alarm upon occurrence of a fault
PRECAUTION:
(1) In CMEA Y=0, the fault information is automatically displayed when
first data 00.
(2) See Fault Information Display in the following pages for details on how to read the fault
information.
ASSIGNMENT PROCEDURE:
ST + EAY + DE
DATA TABLE:
Y
No. MEANING
0 Fault information
display
Page 736
1 Clear External
Alarm Kind
(MJ/MN)
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
1ST DATA
+ (2 digits) + DE
1ST DATA
DATA MEANING
00 All fault information stored in
Fault Information Memory is
displayed one after another from
the oldest to the newest
00 Clear all of MJ/MN /– – alarms
01 Clear MJ alarms
02 Clear MN alarms
2ND DATA
+ + EXE
(1-3 digits)
DATA
–
NOTE 1
NOTE 6
CCC
– 726 –
is pressed after entering
DE
2ND DATA
MEANING
–
Alarm Clear CM61 Y=30
Continued on next page
NWA-008844-001 Rev.5.0
CMEA
RELATED
COMMAND
91ch3008.fm