Chapter 2 Preparations
1.19
2.5-inch universal media bay
For the 8x 2.5-inch drive model, you can install an optional 2x SAS/SATA drive or optical disk drive in the
universal media bay.
Installing 2x 2.5-inch Drive Cage (SAS/SATA) N8154-89
To support 10x 2.5-inch drives, we recommend installing AROC (Type-a) RAID controller N8103-191/194.
Please prepare the following before installing the option.
Parts included in the option kit
T-10 hexalobular driver
2x SAS, SATA drive, or dummy tray
Additional cable
To install the components, follow these steps.
4.
Back up all data in the server.
5.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
6.
Remove the screws (x3) and remove the universal media bay blank panel.
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Universal media bay
127