Optional) Configuring An Http Parameter Profile; Configuring A Layer 3 Classifier - Huawei S9700 Series Configuration Manual

S9700 Core Routing Switch
Configuration Guide - SPU

6.4.11 (Optional) Configuring an HTTP Parameter Profile

This section describes how to configure an HTTP parameter profile and set related parameters
for processing HTTP packets, including the maximum parsing length and the functions of per-
packet rebalance.
Context
Case sensitivity indicates that the SPU distinguishes uppercase and lowercase letters when
parsing HTTP packets.
Per-packet rebalance indicates that the SPU makes load balancing decisions again and selects
another server for each HTTP request packet even if the quintuple is the same.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
load-balance parameter http profile-name
An HTTP parameter profile is created and the HTTP parameter profile view is displayed.
Up to 1024 HTTP parameter profiles can be created.
By default, no HTTP parameter profile is created.
Step 3 Run:
max-parse-length length-value
The maximum parsing length of HTTP packets is set.
By default, the maximum parsing length of HTTP packets is 1024 bytes.
Step 4 Run:
rebalance per-request
Each HTTP request is rebalanced.
By default, the SPU does not rebalance newly received HTTP requests.
----End

6.4.12 Configuring a Layer 3 Classifier

This section describes how to create a Layer 3 classifier and configure a matching rule.
Context
To classify packets according to the quintuple, you need to create and configure a Layer 3
classifier.
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Load Balancing Configuration
222