Configuring Local User Management; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security
Procedure
l
----End
Example
After the configuration, you can run the display domain command to view the summary of all
domains.
<Quidway> display domain
-------------------------------------------------------------------------
DomainName
-------------------------------------------------------------------------
default
default_admin
huawei
-------------------------------------------------------------------------
Total: 3
Run the display domain [ name domain-name ] command, and you can view the configuration
of a specified domain.
<Quidway> display domain name huawei
Domain-name
Domain-state
Authentication-scheme-name
Accounting-scheme-name
Authorization-scheme-name
Service-scheme-name
RADIUS-server-template
HWTACACS-server-template

1.8 Configuring Local User Management

This section describes how to configure local user management on the S2700.

1.8.1 Establishing the Configuration Task

Applicable Environment
You can create a local user on the S2700, configure attributes of the local user, and perform
authentication and authorization for users logging in to the S2700 according to information about
the local user.
Pre-configuration Tasks
None
Data Preparation
To configure local user management, you need the following data.
Issue 01 (2011-07-15)
Run the display domain [ name domain-name ] command to check the configuration of
the domain.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
index
0
1
2
: huawei
: Active
: scheme0
: default
: -
: -
: -
: -
33