Ip Multicast Forward-First-Packet - Allied Telesis AT-AR3050S Command Reference Manual

M C
ULTICAST OMMANDS
- -
IP MULTICAST FORWARD FIRST PACKET

ip multicast forward-first-packet

Overview Use this command to enable multicast to forward the first multicast packets
coming to the device.
Use the no variant of this command to disable this feature.
Syntax ip multicast forward-first-packet
no ip multicast forward-first-packet
Default By default, this feature is disabled.
Mode Global Configuration
Usage If this command is enabled, the device will forward the first packets in a multicast
stream that create the multicast route, possibly causing degradation in the quality
of the multicast stream, such as the pixelation of video and audio data.
NOTE
enabled, the default setting, otherwise the device will not process the first packets of
the multicast stream correctly.
The device will forward the first multicast packets to all interfaces which are on the
same VLAN as those which asked for this multicast group.
Examples To enable the forwarding of the first multicast packets, use the following
commands:
awplus#
awplus(config)#
To disable the forwarding of the first multicast packets, use the following
commands:
awplus#
awplus(config)#
C613-50077-01 REV A
: If you use this command, ensure that the
configure terminal
ip multicast forward-first-packet
configure terminal
no ip multicast forward-first-packet
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
ip igmp snooping command is
1276