Debug Policy-Based-Routing - Allied Telesis AT-AR3050S Command Reference Manual

P - R C
OLICY BASED OUTING OMMANDS
- -
DEBUG POLICY BASED ROUTING

debug policy-based-routing

Overview Use this command to enable policy-based routing debugging. This will cause
messages containing detailed debugging information to be displayed and logged
at the "debugging" level.
Use the no variant of this command to disable policy-based routing debugging.
Syntax debug policy-based-routing
no debug policy-based-routing
Default Policy-based routing debugging is disabled by default.
Mode Privileged Exec
Examples To enable policy-based routing debugging, use the command:
awplus#
To disable policy-based routing debugging, use the command:
awplus#
Related ip policy-route
Commands
ipv6 policy-route
policy-based-routing
show ip pbr route
show ipv6 pbr route
C613-50077-01 REV A
debug policy-based-routing
no debug policy-based-routing
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1252