Mazda 2002 6 Workshop Manual page 1163

.
1 Heater hose
2 Cooler hose (Lo) (L.H.D.) or cooler pipe No.4
(R.H.D.)
(See U–28 Refrigerant Lines Removal
(See U–29 Refrigerant Lines Installation
3 Cooler pipe No.3
(See U–28 Refrigerant Lines Removal
(See U–29 Refrigerant Lines Installation
4 A/C unit
(See U–17 A/C Unit Installation
7. Install in the reverse order of removal.
8. Perform the refrigerant system performance test. (See
TEST.)
A/C Unit Installation Note
1. When installing a new A/C unit or evaporator, add a supplemental amount of ATMOS GU10 compressor oil into
the refrigerant cycle.
Supplemental amount (approximate quantity)
25 ml {25 cc, 0.8 fl oz}
End Of Sie
BASIC SYSTEM
Note)
Note)
Note)
Note)
Note)
U–13 REFRIGERANT SYSTEM PERFORMANCE
A6E8516W019
U
U–17