Mazda 2002 6 Workshop Manual page 1197

Wire Disassembly Note
1. Disassemble the wires in the shown in the figure.
Wire Assembly Note
1. Assemble the wires to the position as shown in
the figure.
End Of Sie
CLIMATE CONTROL UNIT WIRE ADJUSTMENT
Air Mix Wire
1. Set the temperature control dial at max cold.
2. Set the air mix link to max cold in the direction shown
by the arrow and insert a screwdriver at the set hole.
3. Connect the air mix wire to air mix link.
4. Clamp the air mix wire to wire clamp.
5. Verify that the temperature control dial moves its full
stroke.
Airflow Mode Wire
1. Set the airflow mode control dial at defroster.
U–46
CONTROL SYSTEM
A6E8540W031
A6E8540W032
A6E8540W033
A6E854061190W05
A6E8540W034