Audio Amplifier (External) Inspection
1. With audio on, first press the POWER button, then simultaneously press the SCAN button for approximately 1
second.
2. Inspect the audio amplifier (external) according to the following table:
Inspection
Start audio amplifier
(external) inspection mode.
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.
End Of Sie
T–178
ON-BOARD DIAGNOSTIC [AUDIO]
Display
Speakers output
System is okay.
sound.
Speakers do not
Inspect following parts.
• Audio amplifier (external)
output sound.
• Speakers
• Woofer relay
• Wiring harness
Replace base unit.
Action
(base unit—audio amplifier
(external)—Woofer relay)