Mazda 2002 6 Workshop Manual page 1185

AIRFLOW MODE ACTUATOR INSPECTION
1. Connect battery positive voltage to terminal D or F and ground to terminal F or D of the airflow mode actuator.
2. Verify that the airflow mode actuator operates as shown below.
• If not as specified, replace the airflow mode actuator.
Connection
B+ GND
D F
F D
3. Verify that the resistance between the terminals
of the airflow mode actuator is as shown in the
graph.
• If not as specified, replace the airflow mode
actuator.
End Of Sie
U–34
CONTROL SYSTEM
Movement
DEFROSTER → VENT
VENT → DEFROSTER
A6E854061070W02
A6E8540W008
A6E8540W009
A6E8540W046
A6E8540W047