Selector Cable Adjustment - Mazda Mazda6 Workshop Manual Supplement

Hide thumbs Also See for Mazda6:

Table of Contents

SELECTOR CABLE ADJUSTMENT

1. Remove the center console.

2. Shift the selector lever to P position.

3. Unlock the lock piece of the selector cable

(selector lever side) in the order shown in the

4. Verify that the manual shaft is in P position.

5. Lock the lock piece of the selector cable (selector

lever side) in the order shown in the figure.

6. Install the center console.

7. Shift the selector lever from P position to M range,

and make sure that there are no other

components in that area to interfere with the lever.

AUTOMATIC TRANSAXLE SHIFT MECHANISM

A6E571646500201

Table of Contents