Crankshaft Position Sensor - SSANGYONG 1999 Musso Service Manual

CRANKSHAFT POSITION SENSOR

1 Crankshaft Position Sensor
2 Bolt (M6 X 14) ........................................ 9 -11Nm
Removal & Installation Procedure
1. Disconnect the wiring connector at the crankshaft position
sensor.
2. Unscrew the bolt and remove the crankshaft position sensor
unit.
Installation Notice
Tightening Torque
3. Installation should follow the removal procedure in the
reverse order.
3 Segment
4 Flywheel
9 -11Nm
M162 ENGINE CONTROLS 1F1-65