SSANGYONG 1999 Musso Service Manual page 743

1F3-14 OM600 ENGINE CONTROLS
Removal & Installation Procedure
1. Remove the vacuum line (3, 4).
2. Remove the bolts (1) evenly.
Notice
If necessary, rotate the engine until the pressure on the
tappet of the vacuum pump is released.
3. Remove the vacuum pump (2).
4. Install the vacuum pump (2).
Tightening Torque
Notice
Clean the gasket residues of sealing surface of vacuum
pump and replace the gasket(5).
5. Connect the vacuum line (3, 4).
10 Nm